EXAMINATION GLOVES NON STERILE LATEX 240MM POWDER-FREE MEDICAL DEVICE PPE CAT III- BOX OF 100 UNITS

  • The Polysem Medical non sterile latex examination gloves meet the technical specifications for a latex examination glove.
  • These gloves are rated as both a Class I medical device and Category III type C Personal Protective Equipment.
  • Low protein content

Description

Polysem Medical examination gloves are indicated when the use of a non-sterile ambidextrous glove is required.

In particular, they can be used in the different units when a non-sterile glove is required.

Cuff size: 240 mm

Colour: Cream

Informations
techniques

Indications 
All procedures of short duration requiring an examination glove.

Matériaux utilisés 
Latex and natural rubber - Vulcanising agent: Sulphur - Vulcanisation accelerators: ZDEC, ZDBC and ZMBT

Étiquetage 
on each unit are written the reference, the lot/serial number, the sterilization method and the expiry date if applicable

dispositif médical 

  • MD class : I
  • MD notified body : NA
  • EU directive/regulation : 2017/745
  • annexe : IV

EPI 

  • european directive(s) - regulation(s) : 2016/425
  • IPE category : III
  • IPE notified body : 2777

stérile 

  • stérile : no

conformité 

  • Medical gloves for single use - Part 1: Requirements and testing for freedom from holes
  • Medical gloves for single use - Part 2: Requirements and testing for physical properties
  • Medical gloves for single use - Part 3: Requirements and testing for biological evaluation
  • Medical gloves for single use - Part 4: Requirements and testing for shelf life determination
  • Clothing for protection against contact with blood and body fluids. Determination of resistance of protective clothing materials to penetration by blood-borne pathogens. Test method using Phi-X174 Bacteriophage
  • Determination of material resistance to permation by chemicals - Part 1: permeation by liquid chemical under conditions of continuous contact
  • Protective gloves against chemicals and micro-organisms - Part 2 : determination of resistance to penetration
  • Protective gloves against chemicals and micro-organisms - Part 4 : determination of resistance to degradation by chemicals
  • Protective gloves - General requirements and test methods
  • Protective gloves against dangerous chemicals and micro-organisms - Part 1 : Terminology and performance requirements for chemical risks.
  • Protective gloves against dangerous chemicals and micro-organisms - Part 1 : Terminology and performance requirements for micro-organisms risks.

opérateur économique 

  • MANUFACTURER : DIDACTIC / 216 Rue Roland Moreno - 76210 Saint-Jean-de-

Polysem Medical examination gloves are indicated when the use of a non-sterile ambidextrous glove is required.

In particular, they can be used in the different units when a non-sterile glove is required.

Cuff size: 240 mm

Colour: Cream

Indications 
All procedures of short duration requiring an examination glove.

Matériaux utilisés 
Latex and natural rubber - Vulcanising agent: Sulphur - Vulcanisation accelerators: ZDEC, ZDBC and ZMBT

Étiquetage 
on each unit are written the reference, the lot/serial number, the sterilization method and the expiry date if applicable

dispositif médical 

  • MD class : I
  • MD notified body : NA
  • EU directive/regulation : 2017/745
  • annexe : IV

EPI 

  • european directive(s) - regulation(s) : 2016/425
  • IPE category : III
  • IPE notified body : 2777

stérile 

  • stérile : no

conformité 

  • Medical gloves for single use - Part 1: Requirements and testing for freedom from holes
  • Medical gloves for single use - Part 2: Requirements and testing for physical properties
  • Medical gloves for single use - Part 3: Requirements and testing for biological evaluation
  • Medical gloves for single use - Part 4: Requirements and testing for shelf life determination
  • Clothing for protection against contact with blood and body fluids. Determination of resistance of protective clothing materials to penetration by blood-borne pathogens. Test method using Phi-X174 Bacteriophage
  • Determination of material resistance to permation by chemicals - Part 1: permeation by liquid chemical under conditions of continuous contact
  • Protective gloves against chemicals and micro-organisms - Part 2 : determination of resistance to penetration
  • Protective gloves against chemicals and micro-organisms - Part 4 : determination of resistance to degradation by chemicals
  • Protective gloves - General requirements and test methods
  • Protective gloves against dangerous chemicals and micro-organisms - Part 1 : Terminology and performance requirements for chemical risks.
  • Protective gloves against dangerous chemicals and micro-organisms - Part 1 : Terminology and performance requirements for micro-organisms risks.

opérateur économique 

  • MANUFACTURER : DIDACTIC / 216 Rue Roland Moreno - 76210 Saint-Jean-de-

Vidéo(s)


Warning: Undefined array key 0 in /home/clients/7c4595a329c1d2b0f344322e668fe39e/sites/didactic.care/wp-content/themes/didactic_theme/functions.php on line 478

Oops! We could not locate your form.