STERILE INFUSION SET PVC DEHP-FREE BPA-FREE 3X4.1 1 WAY GRAVITY 5.5 MOBILE LUER LOCK VENT FILTER 160 CM
Vous êtes :
The sterile, DEHP-free, BPA-free INFINEED 1-way infuser with photoprotective UV filter has been designed to minimize its environmental impact, using exclusively raw materials free of endocrine disruptors (elimination of components containing DEHP or BPA).
- Dual Channel Perforator
- Air intake: Delivered closed for immediate pocket use - 0.2µm filter.
- Chamber: Soft and translucent - Calibrated at 20 drops = 1ml ± 0.1ml - 15µ anti-particle filter.
- Caster: Precise and reliable, linear flow regulator.
- Tubing: translucent yellow PVC designed for comfort and optimal adjustment regularity and to avoid kinks.
- Terminal tip: Mobile Luer Lock.
- Terminal cap: Equipped with a purge filter with anti-bacterial membrane.
Made in China.
Contact with 0.5% or 2% Chlorhexidine in 70° Isopropyl alcohol, without evaporation time, and while the luer lock is connected, therefore under physical stress, presents a significant risk of cracking of the luer lock, and should be avoided as much as possible.
In accordance with the recommendations of the SF2H (2019) and Didactic's disinfection protocol, it is always preferable to disinfect the connectors (when necessary) with 70° ethyl alcohol followed by a mandatory drying time of 15 secondes at least before connecting. 70° ethyl alcohol is just as effective disinfecting inert materials and then reduces the risk of altering plastic materials.
Indications
This device allows the administration by gravity of parenteral injectable preparations: drugs, solutions, parenteral nutrition, photosensitive drugs.
Gravity infusion set, do not use with pressure. Do not use for transfusion or for medicine that need a 0.2µm filter.
On the peripheral or central route, the infusion line can remain in place for a maximum of 96 hours (following the establishment's hygiene protocol).
Dispose according to the state member regulation.
Matériaux utilisés
PVC tubing chamber
DEHP < 0.1% m/m
ABS flow regulator
Luer lock ABS
Polyethylene (PE) protective cap
Étiquetage
on each unit are written the reference, the lot/serial number, the sterilization method and the expiry date if applicable
dispositif médical
stérile
conformité
Conditions de transport
Store away from light and moisture, at a temperature between 10 and 40°C.
| Conditionnement | Quantités de pièces | Dimensions en cm | Poids en kg | Ean 13 du conditionnement |
| UNIT | 1 | 23 x 13 x 0 | 06972620110466 | |
| BAG | 25 | |||
| CASE | 200 | 46 x 52 x 40 | 16972620110463 |
